The new spot free water systems
By using one of our new conversion systems on your CR Spotless DI system you will not only put 40% more resin into the machine, but by doing away with the cartridges (which leak at the seals) your system will produce far more DI water than before.
How does it work?
What is required to convert your CR Spotless DI system to the new DI system is quite straightforward.
You simply remove the inner cartridges from your Spotless DI system and install our new feeder tubes (see photo). Fill the blue outer containers with new resin and then screw the cartridge body back onto the housing, with the new feeder tubes inserted directly into the resin.
This way your standard Spotless DI system machine will hold 40% more resin than it would if using the 20″ plastic inner cartridge cartridges.
We can also supply a 1 cubic foot bag of resin (equivalent to 6 of the previously installed Spotless cartridges refills) at approximately half the price. By using this system you will benefit from using 100% of the resin inside the housing and there will be no leaking seals to contaminate the DI water.
This will make the small DIC 10 unit produce as much DI water than the standard DIC 20, and the DIC 20 after conversion will now produce 660 gallons DI water, that’s 260 gallons more (based on TDS of 110 ppm) . See one of the videos on how to convert your Spotless DI system.
How to convert your spotless system video 1
How to convert your DI Resin video 2
The new more efficient range of spot free water DI systems
All our tanks have 2 years warranty
*NEW* DI Pro 100
This Pro 100 system holds 1 cubic foot of DI resin and will produce 4,000 gallons of DI water (TDS of 110 ppm). It also has a really useful by-pass valve on top of the unit which makes it really easy to pre-rinse/wash your RV using normal water and then switch across to DI water for that all-important final rinse. This is a vast improvement on the Spotless system and will also take up less room. This system can handle 10 GPM.
The DIC 20 Spotless system produces only 800 gallons of DI water (TDS of 110 ppm).
The DI Rinse Pro 100 produces 4,000 gallons of DI water (TDS of 110 ppm).
Dimensions: H 35″ W 8″
See what questions others have asked prior to purchasing this system
Click here to order
*NEW* Compact DI Pro 50
The Pro 50 compact system holds 1/2 cubic foot of DI resin and will produce 2,000 gallons of DI water per refill (based on TDS of 110 ppm). It also has a really useful by-pass valve on top of the unit which makes it really easy to pre-rinse/wash your RV using normal water and then switch across to DI water for that all-important final rinse. This is a vast improvement on the Spotless system and will also take up less room.
The DIC 20 Spotless system produces 800 gallons of DI water(based on TDS of 110 ppm)
The DI Rinse Pro 50 produces 2,000 gallons of DI water (based on TDS of 110 ppm)
This system can handle 5 GPM.
Dimensions: H 35″ W 6″ TDS of 110 ppm Ask a pre-sales question
OUR UNITS ARE IN STOCK AND READY TO SHIP
The new compact range is only available through RV-mods.com